HKX Kit Explorer

Hydraulic System: Double acting (2-way oil)

Line Sizing: 60% of 2 pump at approximately 35 FPS

Line Pressure: 5,000 PSI rated hoses

Upgradeable: Yes

Control(s): Joystick, OEM Joystick or Foot Pedal

Recommended Option(s): - 2 pump flow - New flange SAE Code 62 - Proportional joystick

Applicable Attachments: - Auger (may require Case Drain) - Crusher O/C - Pulverizer O/C - Shear O/C - Other 2-way high-flow attachments

Notes: Pre-formed and powder-coated tubing to the end of the arm, terminating in ball valve. Flange upgrade available for 20 to 25-metric ton machines, standard for 30+ metric ton machines.

Hydraulic System: Double acting (2-way oil)

Line Sizing: 60% of 2 pump at approximately 35 FPS

Line Pressure: 5,000 PSI rated hoses

Upgradeable: Yes

Control(s): Joystick, OEM Joystick or Foot Pedal

Recommended Option(s): - 2 pump flow - New flange SAE Code 62 - Proportional joystick

Applicable Attachments: - Auger (may require Case Drain) - Crusher O/C - Pulverizer O/C - Shear O/C - Other 2-way high-flow attachments

Notes: Pre-formed and powder-coated tubing to the end of the arm, terminating in ball valve. Flange upgrade available for 20 to 25-metric ton machines, standard for 30+ metric ton machines.

Hydraulic System: Double acting (2-way oil)

Line Sizing: 60% of 2 pump at approximately 35 FPS

Line Pressure: 5,000 PSI rated hoses

Upgradeable: Yes

Control(s): Joystick, OEM Joystick or Foot Pedal

Recommended Option(s): - 2 pump flow - New flange SAE Code 62 - Proportional joystick

Applicable Attachments: - Auger (may require Case Drain) - Crusher O/C - Pulverizer O/C - Shear O/C - Other 2-way high-flow attachments

Notes: Pre-formed and powder-coated tubing to the end of the arm, terminating in ball valve. Flange upgrade available for 20 to 25-metric ton machines, standard for 30+ metric ton machines.

Hydraulic System: Single or double acting (1- or 2-way oil)

Line Sizing: 80% of 1 pump at approximately 25 FPS

Line Pressure: 5,000 PSI rated hoses

Upgradeable: Yes

Control(s): Joystick, OEM Joystick or Foot Pedal

Recommended Option(s): - OEM Monitor Flow Control (standard where applicable) - Electronic Function Select - Secondary Pressure Relief (standard on Komatsu)

Applicable Attachments: Most attachments requiring only 1 circuit with up to 3,000 PSI and 80% of 1 pump flow.

Notes: Pre-formed and powder-coated tubing to the end of the arm, terminating in ball valve. Includes a manually operated combination selector valve. Flange upgrade available on 20-25 metric ton machines, standard for 30+ metric ton machines.

Hydraulic System: Double acting (2-way oil)

Line Sizing: 60% of 2 pump at approximately 35 FPS

Line Pressure: 5,000 PSI rated hoses

Upgradeable: Yes

Control(s): Joystick, OEM Joystick or Foot Pedal

Recommended Option(s): - 2 pump flow - New flange SAE Code 62 - Proportional joystick

Applicable Attachments: - Auger (may require Case Drain) - Crusher O/C - Pulverizer O/C - Shear O/C - Other 2-way high-flow attachments

Notes: Pre-formed and powder-coated tubing to the end of the arm, terminating in ball valve. Flange upgrade available for 20 to 25-metric ton machines, standard for 30+ metric ton machines.

Hydraulic System: Single or double acting (1- or 2-way oil)

Line Sizing: 80% of 1 pump at approximately 25 FPS

Line Pressure: 5,000 PSI rated hoses

Upgradeable: Yes

Control(s): Joystick, OEM Joystick or Foot Pedal

Recommended Option(s): - OEM Monitor Flow Control (standard where applicable) - Electronic Function Select - Secondary Pressure Relief (standard on Komatsu)

Applicable Attachments: Most attachments requiring only 1 circuit with up to 3,000 PSI and 80% of 1 pump flow.

Notes: Pre-formed and powder-coated tubing to the end of the arm, terminating in ball valve. Includes a manually operated combination selector valve. Flange upgrade available on 20-25 metric ton machines, standard for 30+ metric ton machines.

Hydraulic System: Single or double acting (1- or 2-way oil)

Line Sizing: 80% of 1 pump at approximately 25 FPS

Line Pressure: 5,000 PSI rated hoses

Upgradeable: Yes

Control(s): Joystick, OEM Joystick or Foot Pedal

Recommended Option(s): - OEM Monitor Flow Control (standard where applicable) - Electronic Function Select - Secondary Pressure Relief (standard on Komatsu)

Applicable Attachments: Most attachments requiring only 1 circuit with up to 3,000 PSI and 80% of 1 pump flow.

Notes: Pre-formed and powder-coated tubing to the end of the arm, terminating in ball valve. Includes a manually operated combination selector valve. Flange upgrade available on 20-25 metric ton machines, standard for 30+ metric ton machines.

Hydraulic System: Single or double acting (1- or 2-way oil)

Line Sizing: 80% of 1 pump at approximately 25 FPS

Line Pressure: 5,000 PSI rated hoses

Upgradeable: Yes

Control(s): Joystick, OEM Joystick or Foot Pedal

Recommended Option(s): - OEM Monitor Flow Control (standard where applicable) - Electronic Function Select - Secondary Pressure Relief (standard on Komatsu)

Applicable Attachments: Most attachments requiring only 1 circuit with up to 3,000 PSI and 80% of 1 pump flow.

Notes: Pre-formed and powder-coated tubing to the end of the arm, terminating in ball valve. Includes a manually operated combination selector valve. Flange upgrade available on 20-25 metric ton machines, standard for 30+ metric ton machines.

Hydraulic System: Double acting (2-way oil)

Line Sizing: 60% of 2 pump at approximately 35 FPS

Line Pressure: 5,000 PSI rated hoses

Upgradeable: Yes

Control(s): Joystick, OEM Joystick or Foot Pedal

Recommended Option(s): - 2 pump flow - New flange SAE Code 62 - Proportional joystick

Applicable Attachments: - Auger (may require Case Drain) - Crusher O/C - Pulverizer O/C - Shear O/C - Other 2-way high-flow attachments

Notes: Pre-formed and powder-coated tubing to the end of the arm, terminating in ball valve. Flange upgrade available for 20 to 25-metric ton machines, standard for 30+ metric ton machines.

Hydraulic System: Double acting (2-way oil)

Line Sizing: 60% of 2 pump at approximately 35 FPS

Line Pressure: 5,000 PSI rated hoses

Upgradeable: Yes

Control(s): Joystick, OEM Joystick or Foot Pedal

Recommended Option(s): - 2 pump flow - New flange SAE Code 62 - Proportional joystick

Applicable Attachments: - Auger (may require Case Drain) - Crusher O/C - Pulverizer O/C - Shear O/C - Other 2-way high-flow attachments

Notes: Pre-formed and powder-coated tubing to the end of the arm, terminating in ball valve. Flange upgrade available for 20 to 25-metric ton machines, standard for 30+ metric ton machines.

Hydraulic System: Double acting (2-way oil)

Line Sizing: 60% of 2 pump at approximately 35 FPS

Line Pressure: 5,000 PSI rated hoses

Upgradeable: Yes

Control(s): Joystick, OEM Joystick or Foot Pedal

Recommended Option(s): - 2 pump flow - New flange SAE Code 62 - Proportional joystick

Applicable Attachments: - Auger (may require Case Drain) - Crusher O/C - Pulverizer O/C - Shear O/C - Other 2-way high-flow attachments

Notes: Pre-formed and powder-coated tubing to the end of the arm, terminating in ball valve. Flange upgrade available for 20 to 25-metric ton machines, standard for 30+ metric ton machines.

Hydraulic System: Single or double acting (1- or 2-way oil)

Line Sizing: 80% of 1 pump at approximately 25 FPS

Line Pressure: 5,000 PSI rated hoses

Upgradeable: Yes

Control(s): Joystick, OEM Joystick or Foot Pedal

Recommended Option(s): - OEM Monitor Flow Control (standard where applicable) - Electronic Function Select - Secondary Pressure Relief (standard on Komatsu)

Applicable Attachments: Most attachments requiring only 1 circuit with up to 3,000 PSI and 80% of 1 pump flow.

Notes: Pre-formed and powder-coated tubing to the end of the arm, terminating in ball valve. Includes a manually operated combination selector valve. Flange upgrade available on 20-25 metric ton machines, standard for 30+ metric ton machines.

Hydraulic System: Double acting (2-way oil)

Line Sizing: 60% of 2 pump at approximately 35 FPS

Line Pressure: 5,000 PSI rated hoses

Upgradeable: Yes

Control(s): Joystick, OEM Joystick or Foot Pedal

Recommended Option(s): - 2 pump flow - New flange SAE Code 62 - Proportional joystick

Applicable Attachments: - Auger (may require Case Drain) - Crusher O/C - Pulverizer O/C - Shear O/C - Other 2-way high-flow attachments

Notes: Pre-formed and powder-coated tubing to the end of the arm, terminating in ball valve. Flange upgrade available for 20 to 25-metric ton machines, standard for 30+ metric ton machines.

Hydraulic System: Single or double acting (1- or 2-way oil)

Line Sizing: 80% of 1 pump at approximately 25 FPS

Line Pressure: 5,000 PSI rated hoses

Upgradeable: Yes

Control(s): Joystick, OEM Joystick or Foot Pedal

Recommended Option(s): - OEM Monitor Flow Control (standard where applicable) - Electronic Function Select - Secondary Pressure Relief (standard on Komatsu)

Applicable Attachments: Most attachments requiring only 1 circuit with up to 3,000 PSI and 80% of 1 pump flow.

Notes: Pre-formed and powder-coated tubing to the end of the arm, terminating in ball valve. Includes a manually operated combination selector valve. Flange upgrade available on 20-25 metric ton machines, standard for 30+ metric ton machines.

Hydraulic System: Single or double acting (1- or 2-way oil)

Line Sizing: 80% of 1 pump at approximately 25 FPS

Line Pressure: 5,000 PSI rated hoses

Upgradeable: Yes

Control(s): Joystick, OEM Joystick or Foot Pedal

Recommended Option(s): - OEM Monitor Flow Control (standard where applicable) - Electronic Function Select - Secondary Pressure Relief (standard on Komatsu)

Applicable Attachments: Most attachments requiring only 1 circuit with up to 3,000 PSI and 80% of 1 pump flow.

Notes: Pre-formed and powder-coated tubing to the end of the arm, terminating in ball valve. Includes a manually operated combination selector valve. Flange upgrade available on 20-25 metric ton machines, standard for 30+ metric ton machines.

Hydraulic System: Double acting (2-way oil)

Line Sizing: 60% of 2 pump at approximately 35 FPS

Line Pressure: 5,000 PSI rated hoses

Upgradeable: Yes

Control(s): Joystick, OEM Joystick or Foot Pedal

Recommended Option(s): - 2 pump flow - New flange SAE Code 62 - Proportional joystick

Applicable Attachments: - Auger (may require Case Drain) - Crusher O/C - Pulverizer O/C - Shear O/C - Other 2-way high-flow attachments

Notes: Pre-formed and powder-coated tubing to the end of the arm, terminating in ball valve. Flange upgrade available for 20 to 25-metric ton machines, standard for 30+ metric ton machines.

Hydraulic System: Double acting (2-way oil)

Line Sizing: 60% of 2 pump at approximately 35 FPS

Line Pressure: 5,000 PSI rated hoses

Upgradeable: Yes

Control(s): Joystick, OEM Joystick or Foot Pedal

Recommended Option(s): - 2 pump flow - New flange SAE Code 62 - Proportional joystick

Applicable Attachments: - Auger (may require Case Drain) - Crusher O/C - Pulverizer O/C - Shear O/C - Other 2-way high-flow attachments

Notes: Pre-formed and powder-coated tubing to the end of the arm, terminating in ball valve. Flange upgrade available for 20 to 25-metric ton machines, standard for 30+ metric ton machines.

Hydraulic System: Single or double acting (1- or 2-way oil)

Line Sizing: 80% of 1 pump at approximately 25 FPS

Line Pressure: 5,000 PSI rated hoses

Upgradeable: Yes

Control(s): Joystick, OEM Joystick or Foot Pedal

Recommended Option(s): - OEM Monitor Flow Control (standard where applicable) - Electronic Function Select - Secondary Pressure Relief (standard on Komatsu)

Applicable Attachments: Most attachments requiring only 1 circuit with up to 3,000 PSI and 80% of 1 pump flow.

Notes: Pre-formed and powder-coated tubing to the end of the arm, terminating in ball valve. Includes a manually operated combination selector valve. Flange upgrade available on 20-25 metric ton machines, standard for 30+ metric ton machines.

Hydraulic System: Single or double acting (1- or 2-way oil)

Line Sizing: 80% of 1 pump at approximately 25 FPS

Line Pressure: 5,000 PSI rated hoses

Upgradeable: Yes

Control(s): Joystick, OEM Joystick or Foot Pedal

Recommended Option(s): - OEM Monitor Flow Control (standard where applicable) - Electronic Function Select - Secondary Pressure Relief (standard on Komatsu)

Applicable Attachments: Most attachments requiring only 1 circuit with up to 3,000 PSI and 80% of 1 pump flow.

Notes: Pre-formed and powder-coated tubing to the end of the arm, terminating in ball valve. Includes a manually operated combination selector valve. Flange upgrade available on 20-25 metric ton machines, standard for 30+ metric ton machines.

Hydraulic System: Double acting (2-way oil)

Line Sizing: 60% of 2 pump at approximately 35 FPS

Line Pressure: 5,000 PSI rated hoses

Upgradeable: Yes

Control(s): Joystick, OEM Joystick or Foot Pedal

Recommended Option(s): - 2 pump flow - New flange SAE Code 62 - Proportional joystick

Applicable Attachments: - Auger (may require Case Drain) - Crusher O/C - Pulverizer O/C - Shear O/C - Other 2-way high-flow attachments

Notes: Pre-formed and powder-coated tubing to the end of the arm, terminating in ball valve. Flange upgrade available for 20 to 25-metric ton machines, standard for 30+ metric ton machines.

Hydraulic System: Double acting (2-way oil)

Line Sizing: 60% of 2 pump at approximately 35 FPS

Line Pressure: 5,000 PSI rated hoses

Upgradeable: Yes

Control(s): Joystick, OEM Joystick or Foot Pedal

Recommended Option(s): - 2 pump flow - New flange SAE Code 62 - Proportional joystick

Applicable Attachments: - Auger (may require Case Drain) - Crusher O/C - Pulverizer O/C - Shear O/C - Other 2-way high-flow attachments

Notes: Pre-formed and powder-coated tubing to the end of the arm, terminating in ball valve. Flange upgrade available for 20 to 25-metric ton machines, standard for 30+ metric ton machines.

Hydraulic System: Double acting (2-way oil)

Line Sizing: 60% of 2 pump at approximately 35 FPS

Line Pressure: 5,000 PSI rated hoses

Upgradeable: Yes

Control(s): Joystick, OEM Joystick or Foot Pedal

Recommended Option(s): - 2 pump flow - New flange SAE Code 62 - Proportional joystick

Applicable Attachments: - Auger (may require Case Drain) - Crusher O/C - Pulverizer O/C - Shear O/C - Other 2-way high-flow attachments

Notes: Pre-formed and powder-coated tubing to the end of the arm, terminating in ball valve. Flange upgrade available for 20 to 25-metric ton machines, standard for 30+ metric ton machines.

Hydraulic System: Double acting (2-way oil)

Line Sizing: 60% of 2 pump at approximately 35 FPS

Line Pressure: 5,000 PSI rated hoses

Upgradeable: Yes

Control(s): Joystick, OEM Joystick or Foot Pedal

Recommended Option(s): - 2 pump flow - New flange SAE Code 62 - Proportional joystick

Applicable Attachments: - Auger (may require Case Drain) - Crusher O/C - Pulverizer O/C - Shear O/C - Other 2-way high-flow attachments

Notes: Pre-formed and powder-coated tubing to the end of the arm, terminating in ball valve. Flange upgrade available for 20 to 25-metric ton machines, standard for 30+ metric ton machines.

Hydraulic System: Double acting (2-way oil)

Line Sizing: 60% of 2 pump at approximately 35 FPS

Line Pressure: 5,000 PSI rated hoses

Upgradeable: Yes

Control(s): Joystick, OEM Joystick or Foot Pedal

Recommended Option(s): - 2 pump flow - New flange SAE Code 62 - Proportional joystick

Applicable Attachments: - Auger (may require Case Drain) - Crusher O/C - Pulverizer O/C - Shear O/C - Other 2-way high-flow attachments

Notes: Pre-formed and powder-coated tubing to the end of the arm, terminating in ball valve. Flange upgrade available for 20 to 25-metric ton machines, standard for 30+ metric ton machines.

Hydraulic System: Double acting (2-way oil)

Line Sizing: Dedicated low flow (20 GPM or less)

Line Pressure: 3,000 PSI rated hoses

Upgradeable: Yes

Control(s): Joystick, OEM Joystick, Proportional Joystick or Foot Pedal

Recommended Option(s): - Proportional Joystick - Secondary Oil Source (used when mounting over an existing auxiliary circuit) - Case Drain

Applicable Attachments: - Rotate - Tilting Bucket - Custom Attachments

Notes: Plumbing to end of the arm ending with low-flow disconnects.

Hydraulic System: Single or double acting (1- or 2-way oil)

Line Sizing: 80% of 1 pump at approximately 25 FPS

Line Pressure: 3,000 PSI rated hoses

Upgradeable: Yes

Control(s): Joystick, OEM Joystick or Foot Pedal

Recommended Option(s): - OEM Monitor Flow Control (standard where applicable) - Electronic Function Select - Secondary Pressure Relief (standard on Komatsu) - Thumb Lock (standard feature)

Applicable Attachments: Most attachments requiring only 1 circuit with up to 3,000 PSI and 80% of 1 pump flow.

Notes: Pre-formed and powder-coated tubing to the end of the arm, terminating in ball valve. Includes a manually operated combination selector valve.

Hydraulic System: Double acting (2-way oil)

Line Sizing: 60% of 2 pump at approximately 35 FPS

Line Pressure: 5,000 PSI rated hoses

Upgradeable: Yes

Control(s): Joystick, OEM Joystick or Foot Pedal

Recommended Option(s): - 2 pump flow - New flange SAE Code 62 - Proportional joystick

Applicable Attachments: - Auger (may require Case Drain) - Crusher O/C - Pulverizer O/C - Shear O/C - Other 2-way high-flow attachments

Notes: Pre-formed and powder-coated tubing to the end of the arm, terminating in ball valve. Flange upgrade available for 20 to 25-metric ton machines, standard for 30+ metric ton machines.

Hydraulic System: Double acting (2-way oil)

Line Sizing: 60% of 2 pump at approximately 35 FPS

Line Pressure: 5,000 PSI rated hoses

Upgradeable: Yes

Control(s): Joystick, OEM Joystick or Foot Pedal

Recommended Option(s): - 2 pump flow - New flange SAE Code 62 - Proportional joystick

Applicable Attachments: - Auger (may require Case Drain) - Crusher O/C - Pulverizer O/C - Shear O/C - Other 2-way high-flow attachments

Notes: Pre-formed and powder-coated tubing to the end of the arm, terminating in ball valve. Flange upgrade available for 20 to 25-metric ton machines, standard for 30+ metric ton machines.

Hydraulic System: Single or double acting (1- or 2-way oil)

Line Sizing: 80% of 1 pump at approximately 25 FPS

Line Pressure: 3,000 PSI rated hoses

Upgradeable: Yes

Control(s): Joystick, OEM Joystick or Foot Pedal

Recommended Option(s): - OEM Monitor Flow Control (standard where applicable) - Electronic Function Select - Secondary Pressure Relief (standard on Komatsu) - Thumb Lock (standard feature)

Applicable Attachments: Most attachments requiring only 1 circuit with up to 3,000 PSI and 80% of 1 pump flow.

Notes: Pre-formed and powder-coated tubing to the end of the arm, terminating in ball valve. Includes a manually operated combination selector valve.

Hydraulic System: Single or double acting (1- or 2-way oil)

Line Sizing: 80% of 1 pump at approximately 25 FPS

Line Pressure: 5,000 PSI rated hoses

Upgradeable: Yes

Control(s): Joystick, OEM Joystick or Foot Pedal

Recommended Option(s): - OEM Monitor Flow Control (standard where applicable) - Electronic Function Select - Secondary Pressure Relief (standard on Komatsu)

Applicable Attachments: Most attachments requiring only 1 circuit with up to 3,000 PSI and 80% of 1 pump flow.

Notes: Pre-formed and powder-coated tubing to the end of the arm, terminating in ball valve. Includes a manually operated combination selector valve. Flange upgrade available on 20-25 metric ton machines, standard for 30+ metric ton machines.

Hydraulic System: Double acting (2-way oil)

Line Sizing: 60% of 2 pump at approximately 35 FPS

Line Pressure: 5,000 PSI rated hoses

Upgradeable: Yes

Control(s): Joystick, OEM Joystick or Foot Pedal

Recommended Option(s): - 2 pump flow - New flange SAE Code 62 - Proportional joystick

Applicable Attachments: - Auger (may require Case Drain) - Crusher O/C - Pulverizer O/C - Shear O/C - Other 2-way high-flow attachments

Notes: Pre-formed and powder-coated tubing to the end of the arm, terminating in ball valve. Flange upgrade available for 20 to 25-metric ton machines, standard for 30+ metric ton machines.

Hydraulic System: Double acting (2-way oil)

Line Sizing: 60% of 2 pump at approximately 35 FPS

Line Pressure: 5,000 PSI rated hoses

Upgradeable: Yes

Control(s): Joystick, OEM Joystick or Foot Pedal

Recommended Option(s): - 2 pump flow - New flange SAE Code 62 - Proportional joystick

Applicable Attachments: - Auger (may require Case Drain) - Crusher O/C - Pulverizer O/C - Shear O/C - Other 2-way high-flow attachments

Notes: Pre-formed and powder-coated tubing to the end of the arm, terminating in ball valve. Flange upgrade available for 20 to 25-metric ton machines, standard for 30+ metric ton machines.

Hydraulic System: Double acting (2-way oil)

Line Sizing: 60% of 2 pump at approximately 35 FPS

Line Pressure: 5,000 PSI rated hoses

Upgradeable: Yes

Control(s): Joystick, OEM Joystick or Foot Pedal

Recommended Option(s): - 2 pump flow - New flange SAE Code 62 - Proportional joystick

Applicable Attachments: - Auger (may require Case Drain) - Crusher O/C - Pulverizer O/C - Shear O/C - Other 2-way high-flow attachments

Notes: Pre-formed and powder-coated tubing to the end of the arm, terminating in ball valve. Flange upgrade available for 20 to 25-metric ton machines, standard for 30+ metric ton machines.

Hydraulic System: Single or double acting (1- or 2-way oil)

Line Sizing: 80% of 1 pump at approximately 25 FPS

Line Pressure: 5,000 PSI rated hoses

Upgradeable: Yes

Control(s): Joystick, OEM Joystick or Foot Pedal

Recommended Option(s): - OEM Monitor Flow Control (standard where applicable) - Electronic Function Select - Secondary Pressure Relief (standard on Komatsu)

Applicable Attachments: Most attachments requiring only 1 circuit with up to 3,000 PSI and 80% of 1 pump flow.

Notes: Pre-formed and powder-coated tubing to the end of the arm, terminating in ball valve. Includes a manually operated combination selector valve. Flange upgrade available on 20-25 metric ton machines, standard for 30+ metric ton machines.

Hydraulic System: Single or double acting (1- or 2-way oil)

Line Sizing: 80% of 1 pump at approximately 25 FPS

Line Pressure: 5,000 PSI rated hoses

Upgradeable: Yes

Control(s): Joystick, OEM Joystick or Foot Pedal

Recommended Option(s): - OEM Monitor Flow Control (standard where applicable) - Electronic Function Select - Secondary Pressure Relief (standard on Komatsu)

Applicable Attachments: Most attachments requiring only 1 circuit with up to 3,000 PSI and 80% of 1 pump flow.

Notes: Pre-formed and powder-coated tubing to the end of the arm, terminating in ball valve. Includes a manually operated combination selector valve. Flange upgrade available on 20-25 metric ton machines, standard for 30+ metric ton machines.

Hydraulic System: Single or double acting (1- or 2-way oil)

Line Sizing: 80% of 1 pump at approximately 25 FPS

Line Pressure: 3,000 PSI rated hoses

Upgradeable: Yes

Control(s): Joystick, OEM Joystick or Foot Pedal

Recommended Option(s): - OEM Monitor Flow Control (standard where applicable) - Electronic Function Select - Secondary Pressure Relief (standard on Komatsu) - Thumb Lock (standard feature)

Applicable Attachments: Most attachments requiring only 1 circuit with up to 3,000 PSI and 80% of 1 pump flow.

Notes: Pre-formed and powder-coated tubing to the end of the arm, terminating in ball valve. Includes a manually operated combination selector valve.

Hydraulic System: Single acting (1-Way Oil)

Line Sizing: 80% of 1 pump at approximately 25 FPS

Line Pressure: 3,000 PSI rated hoses

Upgradeable: Yes

Control(s): Joystick, Foot Pedal or Foot Switch

Recommended Option(s): - 2 Pump Flow - High Pressure Hose (special application) - Oversized Tubing (special application) - In-Monitor Control (standard in most cases) - Quick Disconnects

Applicable Attachments: - Breaker (Hammer) - Breaker (Hammer) - 2 speed (may require additional equipment to shift speeds) - Compactor

Notes: Pre-formed and powder-coated tubing to the end of the arm, terminating in ball valve.

Hydraulic System: Single or double acting (1- or 2-way oil)

Line Sizing: 80% of 1 pump at approximately 25 FPS

Line Pressure: 5,000 PSI rated hoses

Upgradeable: Yes

Control(s): Joystick, OEM Joystick or Foot Pedal

Recommended Option(s): - OEM Monitor Flow Control (standard where applicable) - Electronic Function Select - Secondary Pressure Relief (standard on Komatsu)

Applicable Attachments: Most attachments requiring only 1 circuit with up to 3,000 PSI and 80% of 1 pump flow.

Notes: Pre-formed and powder-coated tubing to the end of the arm, terminating in ball valve. Includes a manually operated combination selector valve. Flange upgrade available on 20-25 metric ton machines, standard for 30+ metric ton machines.

Hydraulic System: Single or double acting (1- or 2-way oil)

Line Sizing: 80% of 1 pump at approximately 25 FPS

Line Pressure: 3,000 PSI rated hoses

Upgradeable: Yes

Control(s): Joystick, OEM Joystick or Foot Pedal

Recommended Option(s): - OEM Monitor Flow Control (standard where applicable) - Electronic Function Select - Secondary Pressure Relief (standard on Komatsu) - Thumb Lock (standard feature)

Applicable Attachments: Most attachments requiring only 1 circuit with up to 3,000 PSI and 80% of 1 pump flow.

Notes: Pre-formed and powder-coated tubing to the end of the arm, terminating in ball valve. Includes a manually operated combination selector valve.

Hydraulic System: Single acting (1-Way Oil)

Line Sizing: 80% of 1 pump at approximately 25 FPS

Line Pressure: 3,000 PSI rated hoses

Upgradeable: Yes

Control(s): Joystick, Foot Pedal or Foot Switch

Recommended Option(s): - 2 Pump Flow - High Pressure Hose (special application) - Oversized Tubing (special application) - In-Monitor Control (standard in most cases) - Quick Disconnects

Applicable Attachments: - Breaker (Hammer) - Breaker (Hammer) - 2 speed (may require additional equipment to shift speeds) - Compactor

Notes: Pre-formed and powder-coated tubing to the end of the arm, terminating in ball valve.

Hydraulic System: Single or double acting (1- or 2-way oil)

Line Sizing: 80% of 1 pump at approximately 25 FPS

Line Pressure: 5,000 PSI rated hoses

Upgradeable: Yes

Control(s): Joystick, OEM Joystick or Foot Pedal

Recommended Option(s): - OEM Monitor Flow Control (standard where applicable) - Electronic Function Select - Secondary Pressure Relief (standard on Komatsu)

Applicable Attachments: Most attachments requiring only 1 circuit with up to 3,000 PSI and 80% of 1 pump flow.

Notes: Pre-formed and powder-coated tubing to the end of the arm, terminating in ball valve. Includes a manually operated combination selector valve. Flange upgrade available on 20-25 metric ton machines, standard for 30+ metric ton machines.

Hydraulic System: Single or double acting (1- or 2-way oil)

Line Sizing: 80% of 1 pump at approximately 25 FPS

Line Pressure: 5,000 PSI rated hoses

Upgradeable: Yes

Control(s): Joystick, OEM Joystick or Foot Pedal

Recommended Option(s): - OEM Monitor Flow Control (standard where applicable) - Electronic Function Select - Secondary Pressure Relief (standard on Komatsu)

Applicable Attachments: Most attachments requiring only 1 circuit with up to 3,000 PSI and 80% of 1 pump flow.

Notes: Pre-formed and powder-coated tubing to the end of the arm, terminating in ball valve. Includes a manually operated combination selector valve. Flange upgrade available on 20-25 metric ton machines, standard for 30+ metric ton machines.

Hydraulic System: Single or double acting (1- or 2-way oil)

Line Sizing: 80% of 1 pump at approximately 25 FPS

Line Pressure: 3,000 PSI rated hoses

Upgradeable: Yes

Control(s): Joystick, OEM Joystick or Foot Pedal

Recommended Option(s): - OEM Monitor Flow Control (standard where applicable) - Electronic Function Select - Secondary Pressure Relief (standard on Komatsu) - Thumb Lock (standard feature)

Applicable Attachments: Most attachments requiring only 1 circuit with up to 3,000 PSI and 80% of 1 pump flow.

Notes: Pre-formed and powder-coated tubing to the end of the arm, terminating in ball valve. Includes a manually operated combination selector valve.

Hydraulic System: Double acting (2-way oil)

Line Sizing: 60% of 2 pump at approximately 35 FPS

Line Pressure: 5,000 PSI rated hoses

Upgradeable: Yes

Control(s): Joystick, OEM Joystick or Foot Pedal

Recommended Option(s): - 2 pump flow - New flange SAE Code 62 - Proportional joystick

Applicable Attachments: - Auger (may require Case Drain) - Crusher O/C - Pulverizer O/C - Shear O/C - Other 2-way high-flow attachments

Notes: Pre-formed and powder-coated tubing to the end of the arm, terminating in ball valve. Flange upgrade available for 20 to 25-metric ton machines, standard for 30+ metric ton machines.

Hydraulic System: Double acting (2-way oil)

Line Sizing: 60% of 2 pump at approximately 35 FPS

Line Pressure: 5,000 PSI rated hoses

Upgradeable: Yes

Control(s): Joystick, OEM Joystick or Foot Pedal

Recommended Option(s): - 2 pump flow - New flange SAE Code 62 - Proportional joystick

Applicable Attachments: - Auger (may require Case Drain) - Crusher O/C - Pulverizer O/C - Shear O/C - Other 2-way high-flow attachments

Notes: Pre-formed and powder-coated tubing to the end of the arm, terminating in ball valve. Flange upgrade available for 20 to 25-metric ton machines, standard for 30+ metric ton machines.

Hydraulic System: Double acting (2-way oil)

Line Sizing: 60% of 2 pump at approximately 35 FPS

Line Pressure: 5,000 PSI rated hoses

Upgradeable: Yes

Control(s): Joystick, OEM Joystick or Foot Pedal

Recommended Option(s): - 2 pump flow - New flange SAE Code 62 - Proportional joystick

Applicable Attachments: - Auger (may require Case Drain) - Crusher O/C - Pulverizer O/C - Shear O/C - Other 2-way high-flow attachments

Notes: Pre-formed and powder-coated tubing to the end of the arm, terminating in ball valve. Flange upgrade available for 20 to 25-metric ton machines, standard for 30+ metric ton machines.

Hydraulic System: Single or double acting (1- or 2-way oil)

Line Sizing: 80% of 1 pump at approximately 25 FPS

Line Pressure: 5,000 PSI rated hoses

Upgradeable: Yes

Control(s): Joystick, OEM Joystick or Foot Pedal

Recommended Option(s): - OEM Monitor Flow Control (standard where applicable) - Electronic Function Select - Secondary Pressure Relief (standard on Komatsu)

Applicable Attachments: Most attachments requiring only 1 circuit with up to 3,000 PSI and 80% of 1 pump flow.

Notes: Pre-formed and powder-coated tubing to the end of the arm, terminating in ball valve. Includes a manually operated combination selector valve. Flange upgrade available on 20-25 metric ton machines, standard for 30+ metric ton machines.

Hydraulic System: Double acting (2-way oil)

Line Sizing: 60% of 2 pump at approximately 35 FPS

Line Pressure: 5,000 PSI rated hoses

Upgradeable: Yes

Control(s): Joystick, OEM Joystick or Foot Pedal

Recommended Option(s): - 2 pump flow - New flange SAE Code 62 - Proportional joystick

Applicable Attachments: - Auger (may require Case Drain) - Crusher O/C - Pulverizer O/C - Shear O/C - Other 2-way high-flow attachments

Notes: Pre-formed and powder-coated tubing to the end of the arm, terminating in ball valve. Flange upgrade available for 20 to 25-metric ton machines, standard for 30+ metric ton machines.

Hydraulic System: Double acting (2-way oil)

Line Sizing: 60% of 2 pump at approximately 35 FPS

Line Pressure: 5,000 PSI rated hoses

Upgradeable: Yes

Control(s): Joystick, OEM Joystick or Foot Pedal

Recommended Option(s): - 2 pump flow - New flange SAE Code 62 - Proportional joystick

Applicable Attachments: - Auger (may require Case Drain) - Crusher O/C - Pulverizer O/C - Shear O/C - Other 2-way high-flow attachments

Notes: Pre-formed and powder-coated tubing to the end of the arm, terminating in ball valve. Flange upgrade available for 20 to 25-metric ton machines, standard for 30+ metric ton machines.

Hydraulic System: Single or double acting (1- or 2-way oil)

Line Sizing: 80% of 1 pump at approximately 25 FPS

Line Pressure: 5,000 PSI rated hoses

Upgradeable: Yes

Control(s): Joystick, OEM Joystick or Foot Pedal

Recommended Option(s): - OEM Monitor Flow Control (standard where applicable) - Electronic Function Select - Secondary Pressure Relief (standard on Komatsu)

Applicable Attachments: Most attachments requiring only 1 circuit with up to 3,000 PSI and 80% of 1 pump flow.

Notes: Pre-formed and powder-coated tubing to the end of the arm, terminating in ball valve. Includes a manually operated combination selector valve. Flange upgrade available on 20-25 metric ton machines, standard for 30+ metric ton machines.

Hydraulic System: Single or double acting (1- or 2-way oil)

Line Sizing: 80% of 1 pump at approximately 25 FPS

Line Pressure: 5,000 PSI rated hoses

Upgradeable: Yes

Control(s): Joystick, OEM Joystick or Foot Pedal

Recommended Option(s): - OEM Monitor Flow Control (standard where applicable) - Electronic Function Select - Secondary Pressure Relief (standard on Komatsu)

Applicable Attachments: Most attachments requiring only 1 circuit with up to 3,000 PSI and 80% of 1 pump flow.

Notes: Pre-formed and powder-coated tubing to the end of the arm, terminating in ball valve. Includes a manually operated combination selector valve. Flange upgrade available on 20-25 metric ton machines, standard for 30+ metric ton machines.

Hydraulic System: Double acting (2-way oil)

Line Sizing: 60% of 2 pump at approximately 35 FPS

Line Pressure: 5,000 PSI rated hoses

Upgradeable: Yes

Control(s): Joystick, OEM Joystick or Foot Pedal

Recommended Option(s): - 2 pump flow - New flange SAE Code 62 - Proportional joystick

Applicable Attachments: - Auger (may require Case Drain) - Crusher O/C - Pulverizer O/C - Shear O/C - Other 2-way high-flow attachments

Notes: Pre-formed and powder-coated tubing to the end of the arm, terminating in ball valve. Flange upgrade available for 20 to 25-metric ton machines, standard for 30+ metric ton machines.

Hydraulic System: Double acting (2-way oil)

Line Sizing: 60% of 2 pump at approximately 35 FPS

Line Pressure: 5,000 PSI rated hoses

Upgradeable: Yes

Control(s): Joystick, OEM Joystick or Foot Pedal

Recommended Option(s): - 2 pump flow - New flange SAE Code 62 - Proportional joystick

Applicable Attachments: - Auger (may require Case Drain) - Crusher O/C - Pulverizer O/C - Shear O/C - Other 2-way high-flow attachments

Notes: Pre-formed and powder-coated tubing to the end of the arm, terminating in ball valve. Flange upgrade available for 20 to 25-metric ton machines, standard for 30+ metric ton machines.

Hydraulic System: Double acting (2-way oil)

Line Sizing: 60% of 2 pump at approximately 35 FPS

Line Pressure: 5,000 PSI rated hoses

Upgradeable: Yes

Control(s): Joystick, OEM Joystick or Foot Pedal

Recommended Option(s): - 2 pump flow - New flange SAE Code 62 - Proportional joystick

Applicable Attachments: - Auger (may require Case Drain) - Crusher O/C - Pulverizer O/C - Shear O/C - Other 2-way high-flow attachments

Notes: Pre-formed and powder-coated tubing to the end of the arm, terminating in ball valve. Flange upgrade available for 20 to 25-metric ton machines, standard for 30+ metric ton machines.

Hydraulic System: Double acting (2-way oil)

Line Sizing: 60% of 2 pump at approximately 35 FPS

Line Pressure: 5,000 PSI rated hoses

Upgradeable: Yes

Control(s): Joystick, OEM Joystick or Foot Pedal

Recommended Option(s): - 2 pump flow - New flange SAE Code 62 - Proportional joystick

Applicable Attachments: - Auger (may require Case Drain) - Crusher O/C - Pulverizer O/C - Shear O/C - Other 2-way high-flow attachments

Notes: Pre-formed and powder-coated tubing to the end of the arm, terminating in ball valve. Flange upgrade available for 20 to 25-metric ton machines, standard for 30+ metric ton machines.

Hydraulic System: Double acting (2-way oil)

Line Sizing: 60% of 2 pump at approximately 35 FPS

Line Pressure: 5,000 PSI rated hoses

Upgradeable: Yes

Control(s): Joystick, OEM Joystick or Foot Pedal

Recommended Option(s): - 2 pump flow - New flange SAE Code 62 - Proportional joystick

Applicable Attachments: - Auger (may require Case Drain) - Crusher O/C - Pulverizer O/C - Shear O/C - Other 2-way high-flow attachments

Notes: Pre-formed and powder-coated tubing to the end of the arm, terminating in ball valve. Flange upgrade available for 20 to 25-metric ton machines, standard for 30+ metric ton machines.

Hydraulic System: Double acting (2-way oil)

Line Sizing: 60% of 2 pump at approximately 35 FPS

Line Pressure: 5,000 PSI rated hoses

Upgradeable: Yes

Control(s): Joystick, OEM Joystick or Foot Pedal

Recommended Option(s): - 2 pump flow - New flange SAE Code 62 - Proportional joystick

Applicable Attachments: - Auger (may require Case Drain) - Crusher O/C - Pulverizer O/C - Shear O/C - Other 2-way high-flow attachments

Notes: Pre-formed and powder-coated tubing to the end of the arm, terminating in ball valve. Flange upgrade available for 20 to 25-metric ton machines, standard for 30+ metric ton machines.

Hydraulic System: Single or double acting (1- or 2-way oil)

Line Sizing: 80% of 1 pump at approximately 25 FPS

Line Pressure: 5,000 PSI rated hoses

Upgradeable: Yes

Control(s): Joystick, OEM Joystick or Foot Pedal

Recommended Option(s): - OEM Monitor Flow Control (standard where applicable) - Electronic Function Select - Secondary Pressure Relief (standard on Komatsu)

Applicable Attachments: Most attachments requiring only 1 circuit with up to 3,000 PSI and 80% of 1 pump flow.

Notes: Pre-formed and powder-coated tubing to the end of the arm, terminating in ball valve. Includes a manually operated combination selector valve. Flange upgrade available on 20-25 metric ton machines, standard for 30+ metric ton machines.

Hydraulic System: Double acting (2-way oil)

Line Sizing: 60% of 2 pump at approximately 35 FPS

Line Pressure: 5,000 PSI rated hoses

Upgradeable: Yes

Control(s): Joystick, OEM Joystick or Foot Pedal

Recommended Option(s): - 2 pump flow - New flange SAE Code 62 - Proportional joystick

Applicable Attachments: - Auger (may require Case Drain) - Crusher O/C - Pulverizer O/C - Shear O/C - Other 2-way high-flow attachments

Notes: Pre-formed and powder-coated tubing to the end of the arm, terminating in ball valve. Flange upgrade available for 20 to 25-metric ton machines, standard for 30+ metric ton machines.

Hydraulic System: Double acting (2-way oil)

Line Sizing: 60% of 2 pump at approximately 35 FPS

Line Pressure: 5,000 PSI rated hoses

Upgradeable: Yes

Control(s): Joystick, OEM Joystick or Foot Pedal

Recommended Option(s): - 2 pump flow - New flange SAE Code 62 - Proportional joystick

Applicable Attachments: - Auger (may require Case Drain) - Crusher O/C - Pulverizer O/C - Shear O/C - Other 2-way high-flow attachments

Notes: Pre-formed and powder-coated tubing to the end of the arm, terminating in ball valve. Flange upgrade available for 20 to 25-metric ton machines, standard for 30+ metric ton machines.

Hydraulic System: Single or double acting (1- or 2-way oil)

Line Sizing: 80% of 1 pump at approximately 25 FPS

Line Pressure: 5,000 PSI rated hoses

Upgradeable: Yes

Control(s): Joystick, OEM Joystick or Foot Pedal

Recommended Option(s): - OEM Monitor Flow Control (standard where applicable) - Electronic Function Select - Secondary Pressure Relief (standard on Komatsu)

Applicable Attachments: Most attachments requiring only 1 circuit with up to 3,000 PSI and 80% of 1 pump flow.

Notes: Pre-formed and powder-coated tubing to the end of the arm, terminating in ball valve. Includes a manually operated combination selector valve. Flange upgrade available on 20-25 metric ton machines, standard for 30+ metric ton machines.

Hydraulic System: Single or double acting (1- or 2-way oil)

Line Sizing: 80% of 1 pump at approximately 25 FPS

Line Pressure: 5,000 PSI rated hoses

Upgradeable: Yes

Control(s): Joystick, OEM Joystick or Foot Pedal

Recommended Option(s): - OEM Monitor Flow Control (standard where applicable) - Electronic Function Select - Secondary Pressure Relief (standard on Komatsu)

Applicable Attachments: Most attachments requiring only 1 circuit with up to 3,000 PSI and 80% of 1 pump flow.

Notes: Pre-formed and powder-coated tubing to the end of the arm, terminating in ball valve. Includes a manually operated combination selector valve. Flange upgrade available on 20-25 metric ton machines, standard for 30+ metric ton machines.

Hydraulic System: Double acting (2-way oil)

Line Sizing: 60% of 2 pump at approximately 35 FPS

Line Pressure: 5,000 PSI rated hoses

Upgradeable: Yes

Control(s): Joystick, OEM Joystick or Foot Pedal

Recommended Option(s): - 2 pump flow - New flange SAE Code 62 - Proportional joystick

Applicable Attachments: - Auger (may require Case Drain) - Crusher O/C - Pulverizer O/C - Shear O/C - Other 2-way high-flow attachments

Notes: Pre-formed and powder-coated tubing to the end of the arm, terminating in ball valve. Flange upgrade available for 20 to 25-metric ton machines, standard for 30+ metric ton machines.

Hydraulic System: Double acting (2-way oil)

Line Sizing: 60% of 2 pump at approximately 35 FPS

Line Pressure: 5,000 PSI rated hoses

Upgradeable: Yes

Control(s): Joystick, OEM Joystick or Foot Pedal

Recommended Option(s): - 2 pump flow - New flange SAE Code 62 - Proportional joystick

Applicable Attachments: - Auger (may require Case Drain) - Crusher O/C - Pulverizer O/C - Shear O/C - Other 2-way high-flow attachments

Notes: Pre-formed and powder-coated tubing to the end of the arm, terminating in ball valve. Flange upgrade available for 20 to 25-metric ton machines, standard for 30+ metric ton machines.

Hydraulic System: Double acting (2-way oil)

Line Sizing: 60% of 2 pump at approximately 35 FPS

Line Pressure: 5,000 PSI rated hoses

Upgradeable: Yes

Control(s): Joystick, OEM Joystick or Foot Pedal

Recommended Option(s): - 2 pump flow - New flange SAE Code 62 - Proportional joystick

Applicable Attachments: - Auger (may require Case Drain) - Crusher O/C - Pulverizer O/C - Shear O/C - Other 2-way high-flow attachments

Notes: Pre-formed and powder-coated tubing to the end of the arm, terminating in ball valve. Flange upgrade available for 20 to 25-metric ton machines, standard for 30+ metric ton machines.

Hydraulic System: Single or double acting (1- or 2-way oil)

Line Sizing: 80% of 1 pump at approximately 25 FPS

Line Pressure: 5,000 PSI rated hoses

Upgradeable: Yes

Control(s): Joystick, OEM Joystick or Foot Pedal

Recommended Option(s): - OEM Monitor Flow Control (standard where applicable) - Electronic Function Select - Secondary Pressure Relief (standard on Komatsu)

Applicable Attachments: Most attachments requiring only 1 circuit with up to 3,000 PSI and 80% of 1 pump flow.

Notes: Pre-formed and powder-coated tubing to the end of the arm, terminating in ball valve. Includes a manually operated combination selector valve. Flange upgrade available on 20-25 metric ton machines, standard for 30+ metric ton machines.

Hydraulic System: Single or double acting (1- or 2-way oil)

Line Sizing: 80% of 1 pump at approximately 25 FPS

Line Pressure: 5,000 PSI rated hoses

Upgradeable: Yes

Control(s): Joystick, OEM Joystick or Foot Pedal

Recommended Option(s): - OEM Monitor Flow Control (standard where applicable) - Electronic Function Select - Secondary Pressure Relief (standard on Komatsu)

Applicable Attachments: Most attachments requiring only 1 circuit with up to 3,000 PSI and 80% of 1 pump flow.

Notes: Pre-formed and powder-coated tubing to the end of the arm, terminating in ball valve. Includes a manually operated combination selector valve. Flange upgrade available on 20-25 metric ton machines, standard for 30+ metric ton machines.

Hydraulic System: Single or double acting (1- or 2-way oil)

Line Sizing: 80% of 1 pump at approximately 25 FPS

Line Pressure: 3,000 PSI rated hoses

Upgradeable: Yes

Control(s): Joystick, OEM Joystick or Foot Pedal

Recommended Option(s): - OEM Monitor Flow Control (standard where applicable) - Electronic Function Select - Secondary Pressure Relief (standard on Komatsu) - Thumb Lock (standard feature)

Applicable Attachments: Most attachments requiring only 1 circuit with up to 3,000 PSI and 80% of 1 pump flow.

Notes: Pre-formed and powder-coated tubing to the end of the arm, terminating in ball valve. Includes a manually operated combination selector valve.

Hydraulic System: Single acting (1-Way Oil)

Line Sizing: 80% of 1 pump at approximately 25 FPS

Line Pressure: 3,000 PSI rated hoses

Upgradeable: Yes

Control(s): Joystick, Foot Pedal or Foot Switch

Recommended Option(s): - 2 Pump Flow - High Pressure Hose (special application) - Oversized Tubing (special application) - In-Monitor Control (standard in most cases) - Quick Disconnects

Applicable Attachments: - Breaker (Hammer) - Breaker (Hammer) - 2 speed (may require additional equipment to shift speeds) - Compactor

Notes: Pre-formed and powder-coated tubing to the end of the arm, terminating in ball valve.

Hydraulic System: Single or double acting (1- or 2-way oil)

Line Sizing: 80% of 1 pump at approximately 25 FPS

Line Pressure: 5,000 PSI rated hoses

Upgradeable: Yes

Control(s): Joystick, OEM Joystick or Foot Pedal

Recommended Option(s): - OEM Monitor Flow Control (standard where applicable) - Electronic Function Select - Secondary Pressure Relief (standard on Komatsu)

Applicable Attachments: Most attachments requiring only 1 circuit with up to 3,000 PSI and 80% of 1 pump flow.

Notes: Pre-formed and powder-coated tubing to the end of the arm, terminating in ball valve. Includes a manually operated combination selector valve. Flange upgrade available on 20-25 metric ton machines, standard for 30+ metric ton machines.

Hydraulic System: Single or double acting (1- or 2-way oil)

Line Sizing: 80% of 1 pump at approximately 25 FPS

Line Pressure: 5,000 PSI rated hoses

Upgradeable: Yes

Control(s): Joystick, OEM Joystick or Foot Pedal

Recommended Option(s): - OEM Monitor Flow Control (standard where applicable) - Electronic Function Select - Secondary Pressure Relief (standard on Komatsu)

Applicable Attachments: Most attachments requiring only 1 circuit with up to 3,000 PSI and 80% of 1 pump flow.

Notes: Pre-formed and powder-coated tubing to the end of the arm, terminating in ball valve. Includes a manually operated combination selector valve. Flange upgrade available on 20-25 metric ton machines, standard for 30+ metric ton machines.

Hydraulic System: Single acting (1-Way Oil)

Line Sizing: 80% of 1 pump at approximately 25 FPS

Line Pressure: 3,000 PSI rated hoses

Upgradeable: Yes

Control(s): Joystick, Foot Pedal or Foot Switch

Recommended Option(s): - 2 Pump Flow - High Pressure Hose (special application) - Oversized Tubing (special application) - In-Monitor Control (standard in most cases) - Quick Disconnects

Applicable Attachments: - Breaker (Hammer) - Breaker (Hammer) - 2 speed (may require additional equipment to shift speeds) - Compactor

Notes: Pre-formed and powder-coated tubing to the end of the arm, terminating in ball valve.

Hydraulic System: Single or double acting (1- or 2-way oil)

Line Sizing: 80% of 1 pump at approximately 25 FPS

Line Pressure: 5,000 PSI rated hoses

Upgradeable: Yes

Control(s): Joystick, OEM Joystick or Foot Pedal

Recommended Option(s): - OEM Monitor Flow Control (standard where applicable) - Electronic Function Select - Secondary Pressure Relief (standard on Komatsu)

Applicable Attachments: Most attachments requiring only 1 circuit with up to 3,000 PSI and 80% of 1 pump flow.

Notes: Pre-formed and powder-coated tubing to the end of the arm, terminating in ball valve. Includes a manually operated combination selector valve. Flange upgrade available on 20-25 metric ton machines, standard for 30+ metric ton machines.

Hydraulic System: Single or double acting (1- or 2-way oil)

Line Sizing: 80% of 1 pump at approximately 25 FPS

Line Pressure: 5,000 PSI rated hoses

Upgradeable: Yes

Control(s): Joystick, OEM Joystick or Foot Pedal

Recommended Option(s): - OEM Monitor Flow Control (standard where applicable) - Electronic Function Select - Secondary Pressure Relief (standard on Komatsu)

Applicable Attachments: Most attachments requiring only 1 circuit with up to 3,000 PSI and 80% of 1 pump flow.

Notes: Pre-formed and powder-coated tubing to the end of the arm, terminating in ball valve. Includes a manually operated combination selector valve. Flange upgrade available on 20-25 metric ton machines, standard for 30+ metric ton machines.

Hydraulic System: Single or double acting (1- or 2-way oil)

Line Sizing: 80% of 1 pump at approximately 25 FPS

Line Pressure: 5,000 PSI rated hoses

Upgradeable: Yes

Control(s): Joystick, OEM Joystick or Foot Pedal

Recommended Option(s): - OEM Monitor Flow Control (standard where applicable) - Electronic Function Select - Secondary Pressure Relief (standard on Komatsu)

Applicable Attachments: Most attachments requiring only 1 circuit with up to 3,000 PSI and 80% of 1 pump flow.

Notes: Pre-formed and powder-coated tubing to the end of the arm, terminating in ball valve. Includes a manually operated combination selector valve. Flange upgrade available on 20-25 metric ton machines, standard for 30+ metric ton machines.

Hydraulic System: Single or double acting (1- or 2-way oil)

Line Sizing: 80% of 1 pump at approximately 25 FPS

Line Pressure: 3,000 PSI rated hoses

Upgradeable: Yes

Control(s): Joystick, OEM Joystick or Foot Pedal

Recommended Option(s): - OEM Monitor Flow Control (standard where applicable) - Electronic Function Select - Secondary Pressure Relief (standard on Komatsu) - Thumb Lock (standard feature)

Applicable Attachments: Most attachments requiring only 1 circuit with up to 3,000 PSI and 80% of 1 pump flow.

Notes: Pre-formed and powder-coated tubing to the end of the arm, terminating in ball valve. Includes a manually operated combination selector valve.

Hydraulic System: Single or double acting (1- or 2-way oil)

Line Sizing: 80% of 1 pump at approximately 25 FPS

Line Pressure: 5,000 PSI rated hoses

Upgradeable: Yes

Control(s): Joystick, OEM Joystick or Foot Pedal

Recommended Option(s): - OEM Monitor Flow Control (standard where applicable) - Electronic Function Select - Secondary Pressure Relief (standard on Komatsu)

Applicable Attachments: Most attachments requiring only 1 circuit with up to 3,000 PSI and 80% of 1 pump flow.

Notes: Pre-formed and powder-coated tubing to the end of the arm, terminating in ball valve. Includes a manually operated combination selector valve. Flange upgrade available on 20-25 metric ton machines, standard for 30+ metric ton machines.

Hydraulic System: Single or double acting (1- or 2-way oil)

Line Sizing: 80% of 1 pump at approximately 25 FPS

Line Pressure: 5,000 PSI rated hoses

Upgradeable: Yes

Control(s): Joystick, OEM Joystick or Foot Pedal

Recommended Option(s): - OEM Monitor Flow Control (standard where applicable) - Electronic Function Select - Secondary Pressure Relief (standard on Komatsu)

Applicable Attachments: Most attachments requiring only 1 circuit with up to 3,000 PSI and 80% of 1 pump flow.

Notes: Pre-formed and powder-coated tubing to the end of the arm, terminating in ball valve. Includes a manually operated combination selector valve. Flange upgrade available on 20-25 metric ton machines, standard for 30+ metric ton machines.

Hydraulic System: Single or double acting (1- or 2-way oil)

Line Sizing: 80% of 1 pump at approximately 25 FPS

Line Pressure: 5,000 PSI rated hoses

Upgradeable: Yes

Control(s): Joystick, OEM Joystick or Foot Pedal

Recommended Option(s): - OEM Monitor Flow Control (standard where applicable) - Electronic Function Select - Secondary Pressure Relief (standard on Komatsu)

Applicable Attachments: Most attachments requiring only 1 circuit with up to 3,000 PSI and 80% of 1 pump flow.

Notes: Pre-formed and powder-coated tubing to the end of the arm, terminating in ball valve. Includes a manually operated combination selector valve. Flange upgrade available on 20-25 metric ton machines, standard for 30+ metric ton machines.

Hydraulic System: Single or double acting (1- or 2-way oil)

Line Sizing: 80% of 1 pump at approximately 25 FPS

Line Pressure: 5,000 PSI rated hoses

Upgradeable: Yes

Control(s): Joystick, OEM Joystick or Foot Pedal

Recommended Option(s): - OEM Monitor Flow Control (standard where applicable) - Electronic Function Select - Secondary Pressure Relief (standard on Komatsu)

Applicable Attachments: Most attachments requiring only 1 circuit with up to 3,000 PSI and 80% of 1 pump flow.

Notes: Pre-formed and powder-coated tubing to the end of the arm, terminating in ball valve. Includes a manually operated combination selector valve. Flange upgrade available on 20-25 metric ton machines, standard for 30+ metric ton machines.

Hydraulic System: Single or double acting (1- or 2-way oil)

Line Sizing: 80% of 1 pump at approximately 25 FPS

Line Pressure: 5,000 PSI rated hoses

Upgradeable: Yes

Control(s): Joystick, OEM Joystick or Foot Pedal

Recommended Option(s): - OEM Monitor Flow Control (standard where applicable) - Electronic Function Select - Secondary Pressure Relief (standard on Komatsu)

Applicable Attachments: Most attachments requiring only 1 circuit with up to 3,000 PSI and 80% of 1 pump flow.

Notes: Pre-formed and powder-coated tubing to the end of the arm, terminating in ball valve. Includes a manually operated combination selector valve. Flange upgrade available on 20-25 metric ton machines, standard for 30+ metric ton machines.

Hydraulic System: Single or double acting (1- or 2-way oil)

Line Sizing: 80% of 1 pump at approximately 25 FPS

Line Pressure: 5,000 PSI rated hoses

Upgradeable: Yes

Control(s): Joystick, OEM Joystick or Foot Pedal

Recommended Option(s): - OEM Monitor Flow Control (standard where applicable) - Electronic Function Select - Secondary Pressure Relief (standard on Komatsu)

Applicable Attachments: Most attachments requiring only 1 circuit with up to 3,000 PSI and 80% of 1 pump flow.

Notes: Pre-formed and powder-coated tubing to the end of the arm, terminating in ball valve. Includes a manually operated combination selector valve. Flange upgrade available on 20-25 metric ton machines, standard for 30+ metric ton machines.

Hydraulic System: Single or double acting (1- or 2-way oil)

Line Sizing: 80% of 1 pump at approximately 25 FPS

Line Pressure: 5,000 PSI rated hoses

Upgradeable: Yes

Control(s): Joystick, OEM Joystick or Foot Pedal

Recommended Option(s): - OEM Monitor Flow Control (standard where applicable) - Electronic Function Select - Secondary Pressure Relief (standard on Komatsu)

Applicable Attachments: Most attachments requiring only 1 circuit with up to 3,000 PSI and 80% of 1 pump flow.

Notes: Pre-formed and powder-coated tubing to the end of the arm, terminating in ball valve. Includes a manually operated combination selector valve. Flange upgrade available on 20-25 metric ton machines, standard for 30+ metric ton machines.

Hydraulic System: Single or double acting (1- or 2-way oil)

Line Sizing: 80% of 1 pump at approximately 25 FPS

Line Pressure: 5,000 PSI rated hoses

Upgradeable: Yes

Control(s): Joystick, OEM Joystick or Foot Pedal

Recommended Option(s): - OEM Monitor Flow Control (standard where applicable) - Electronic Function Select - Secondary Pressure Relief (standard on Komatsu)

Applicable Attachments: Most attachments requiring only 1 circuit with up to 3,000 PSI and 80% of 1 pump flow.

Notes: Pre-formed and powder-coated tubing to the end of the arm, terminating in ball valve. Includes a manually operated combination selector valve. Flange upgrade available on 20-25 metric ton machines, standard for 30+ metric ton machines.

Hydraulic System: Single or double acting (1- or 2-way oil)

Line Sizing: 80% of 1 pump at approximately 25 FPS

Line Pressure: 5,000 PSI rated hoses

Upgradeable: Yes

Control(s): Joystick, OEM Joystick or Foot Pedal

Recommended Option(s): - OEM Monitor Flow Control (standard where applicable) - Electronic Function Select - Secondary Pressure Relief (standard on Komatsu)

Applicable Attachments: Most attachments requiring only 1 circuit with up to 3,000 PSI and 80% of 1 pump flow.

Notes: Pre-formed and powder-coated tubing to the end of the arm, terminating in ball valve. Includes a manually operated combination selector valve. Flange upgrade available on 20-25 metric ton machines, standard for 30+ metric ton machines.

Hydraulic System: Single or double acting (1- or 2-way oil)

Line Sizing: 80% of 1 pump at approximately 25 FPS

Line Pressure: 5,000 PSI rated hoses

Upgradeable: Yes

Control(s): Joystick, OEM Joystick or Foot Pedal

Recommended Option(s): - OEM Monitor Flow Control (standard where applicable) - Electronic Function Select - Secondary Pressure Relief (standard on Komatsu)

Applicable Attachments: Most attachments requiring only 1 circuit with up to 3,000 PSI and 80% of 1 pump flow.

Notes: Pre-formed and powder-coated tubing to the end of the arm, terminating in ball valve. Includes a manually operated combination selector valve. Flange upgrade available on 20-25 metric ton machines, standard for 30+ metric ton machines.

Hydraulic System: Single or double acting (1- or 2-way oil)

Line Sizing: 80% of 1 pump at approximately 25 FPS

Line Pressure: 5,000 PSI rated hoses

Upgradeable: Yes

Control(s): Joystick, OEM Joystick or Foot Pedal

Recommended Option(s): - OEM Monitor Flow Control (standard where applicable) - Electronic Function Select - Secondary Pressure Relief (standard on Komatsu)

Applicable Attachments: Most attachments requiring only 1 circuit with up to 3,000 PSI and 80% of 1 pump flow.

Notes: Pre-formed and powder-coated tubing to the end of the arm, terminating in ball valve. Includes a manually operated combination selector valve. Flange upgrade available on 20-25 metric ton machines, standard for 30+ metric ton machines.

Hydraulic System: Double acting (2-way oil)

Line Sizing: 60% of 2 pump at approximately 35 FPS

Line Pressure: 5,000 PSI rated hoses

Upgradeable: Yes

Control(s): Joystick, OEM Joystick or Foot Pedal

Recommended Option(s): - 2 pump flow - New flange SAE Code 62 - Proportional joystick

Applicable Attachments: - Auger (may require Case Drain) - Crusher O/C - Pulverizer O/C - Shear O/C - Other 2-way high-flow attachments

Notes: Pre-formed and powder-coated tubing to the end of the arm, terminating in ball valve. Flange upgrade available for 20 to 25-metric ton machines, standard for 30+ metric ton machines.

Hydraulic System: Double acting (2-way oil)

Line Sizing: 60% of 2 pump at approximately 35 FPS

Line Pressure: 5,000 PSI rated hoses

Upgradeable: Yes

Control(s): Joystick, OEM Joystick or Foot Pedal

Recommended Option(s): - 2 pump flow - New flange SAE Code 62 - Proportional joystick

Applicable Attachments: - Auger (may require Case Drain) - Crusher O/C - Pulverizer O/C - Shear O/C - Other 2-way high-flow attachments

Notes: Pre-formed and powder-coated tubing to the end of the arm, terminating in ball valve. Flange upgrade available for 20 to 25-metric ton machines, standard for 30+ metric ton machines.

Hydraulic System: Double acting (2-way oil)

Line Sizing: 60% of 2 pump at approximately 35 FPS

Line Pressure: 5,000 PSI rated hoses

Upgradeable: Yes

Control(s): Joystick, OEM Joystick or Foot Pedal

Recommended Option(s): - 2 pump flow - New flange SAE Code 62 - Proportional joystick

Applicable Attachments: - Auger (may require Case Drain) - Crusher O/C - Pulverizer O/C - Shear O/C - Other 2-way high-flow attachments

Notes: Pre-formed and powder-coated tubing to the end of the arm, terminating in ball valve. Flange upgrade available for 20 to 25-metric ton machines, standard for 30+ metric ton machines.

Hydraulic System: Single or double acting (1- or 2-way oil)

Line Sizing: 80% of 1 pump at approximately 25 FPS

Line Pressure: 5,000 PSI rated hoses

Upgradeable: Yes

Control(s): Joystick, OEM Joystick or Foot Pedal

Recommended Option(s): - OEM Monitor Flow Control (standard where applicable) - Electronic Function Select - Secondary Pressure Relief (standard on Komatsu)

Applicable Attachments: Most attachments requiring only 1 circuit with up to 3,000 PSI and 80% of 1 pump flow.

Notes: Pre-formed and powder-coated tubing to the end of the arm, terminating in ball valve. Includes a manually operated combination selector valve. Flange upgrade available on 20-25 metric ton machines, standard for 30+ metric ton machines.

Hydraulic System: Double acting (2-way oil)

Line Sizing: 60% of 2 pump at approximately 35 FPS

Line Pressure: 5,000 PSI rated hoses

Upgradeable: Yes

Control(s): Joystick, OEM Joystick or Foot Pedal

Recommended Option(s): - 2 pump flow - New flange SAE Code 62 - Proportional joystick

Applicable Attachments: - Auger (may require Case Drain) - Crusher O/C - Pulverizer O/C - Shear O/C - Other 2-way high-flow attachments

Notes: Pre-formed and powder-coated tubing to the end of the arm, terminating in ball valve. Flange upgrade available for 20 to 25-metric ton machines, standard for 30+ metric ton machines.

Hydraulic System: Double acting (2-way oil)

Line Sizing: 60% of 2 pump at approximately 35 FPS

Line Pressure: 5,000 PSI rated hoses

Upgradeable: Yes

Control(s): Joystick, OEM Joystick or Foot Pedal

Recommended Option(s): - 2 pump flow - New flange SAE Code 62 - Proportional joystick

Applicable Attachments: - Auger (may require Case Drain) - Crusher O/C - Pulverizer O/C - Shear O/C - Other 2-way high-flow attachments

Notes: Pre-formed and powder-coated tubing to the end of the arm, terminating in ball valve. Flange upgrade available for 20 to 25-metric ton machines, standard for 30+ metric ton machines.

Hydraulic System: Single or double acting (1- or 2-way oil)

Line Sizing: 80% of 1 pump at approximately 25 FPS

Line Pressure: 5,000 PSI rated hoses

Upgradeable: Yes

Control(s): Joystick, OEM Joystick or Foot Pedal

Recommended Option(s): - OEM Monitor Flow Control (standard where applicable) - Electronic Function Select - Secondary Pressure Relief (standard on Komatsu)

Applicable Attachments: Most attachments requiring only 1 circuit with up to 3,000 PSI and 80% of 1 pump flow.

Notes: Pre-formed and powder-coated tubing to the end of the arm, terminating in ball valve. Includes a manually operated combination selector valve. Flange upgrade available on 20-25 metric ton machines, standard for 30+ metric ton machines.

Hydraulic System: Single or double acting (1- or 2-way oil)

Line Sizing: 80% of 1 pump at approximately 25 FPS

Line Pressure: 5,000 PSI rated hoses

Upgradeable: Yes

Control(s): Joystick, OEM Joystick or Foot Pedal

Recommended Option(s): - OEM Monitor Flow Control (standard where applicable) - Electronic Function Select - Secondary Pressure Relief (standard on Komatsu)

Applicable Attachments: Most attachments requiring only 1 circuit with up to 3,000 PSI and 80% of 1 pump flow.

Notes: Pre-formed and powder-coated tubing to the end of the arm, terminating in ball valve. Includes a manually operated combination selector valve. Flange upgrade available on 20-25 metric ton machines, standard for 30+ metric ton machines.

Hydraulic System: Double acting (2-way oil)

Line Sizing: 60% of 2 pump at approximately 35 FPS

Line Pressure: 5,000 PSI rated hoses

Upgradeable: Yes

Control(s): Joystick, OEM Joystick or Foot Pedal

Recommended Option(s): - 2 pump flow - New flange SAE Code 62 - Proportional joystick

Applicable Attachments: - Auger (may require Case Drain) - Crusher O/C - Pulverizer O/C - Shear O/C - Other 2-way high-flow attachments

Notes: Pre-formed and powder-coated tubing to the end of the arm, terminating in ball valve. Flange upgrade available for 20 to 25-metric ton machines, standard for 30+ metric ton machines.

Hydraulic System: Double acting (2-way oil)

Line Sizing: 60% of 2 pump at approximately 35 FPS

Line Pressure: 5,000 PSI rated hoses

Upgradeable: Yes

Control(s): Joystick, OEM Joystick or Foot Pedal

Recommended Option(s): - 2 pump flow - New flange SAE Code 62 - Proportional joystick

Applicable Attachments: - Auger (may require Case Drain) - Crusher O/C - Pulverizer O/C - Shear O/C - Other 2-way high-flow attachments

Notes: Pre-formed and powder-coated tubing to the end of the arm, terminating in ball valve. Flange upgrade available for 20 to 25-metric ton machines, standard for 30+ metric ton machines.

Hydraulic System: Double acting (2-way oil)

Line Sizing: 60% of 2 pump at approximately 35 FPS

Line Pressure: 5,000 PSI rated hoses

Upgradeable: Yes

Control(s): Joystick, OEM Joystick or Foot Pedal

Recommended Option(s): - 2 pump flow - New flange SAE Code 62 - Proportional joystick

Applicable Attachments: - Auger (may require Case Drain) - Crusher O/C - Pulverizer O/C - Shear O/C - Other 2-way high-flow attachments

Notes: Pre-formed and powder-coated tubing to the end of the arm, terminating in ball valve. Flange upgrade available for 20 to 25-metric ton machines, standard for 30+ metric ton machines.

Hydraulic System: Double acting (2-way oil)

Line Sizing: 60% of 2 pump at approximately 35 FPS

Line Pressure: 5,000 PSI rated hoses

Upgradeable: Yes

Control(s): Joystick, OEM Joystick or Foot Pedal

Recommended Option(s): - 2 pump flow - New flange SAE Code 62 - Proportional joystick

Applicable Attachments: - Auger (may require Case Drain) - Crusher O/C - Pulverizer O/C - Shear O/C - Other 2-way high-flow attachments

Notes: Pre-formed and powder-coated tubing to the end of the arm, terminating in ball valve. Flange upgrade available for 20 to 25-metric ton machines, standard for 30+ metric ton machines.

Hydraulic System: Double acting (2-way oil)

Line Sizing: 60% of 2 pump at approximately 35 FPS

Line Pressure: 5,000 PSI rated hoses

Upgradeable: Yes

Control(s): Joystick, OEM Joystick or Foot Pedal

Recommended Option(s): - 2 pump flow - New flange SAE Code 62 - Proportional joystick

Applicable Attachments: - Auger (may require Case Drain) - Crusher O/C - Pulverizer O/C - Shear O/C - Other 2-way high-flow attachments

Notes: Pre-formed and powder-coated tubing to the end of the arm, terminating in ball valve. Flange upgrade available for 20 to 25-metric ton machines, standard for 30+ metric ton machines.

Hydraulic System: Double acting (2-way oil)

Line Sizing: 60% of 2 pump at approximately 35 FPS

Line Pressure: 5,000 PSI rated hoses

Upgradeable: Yes

Control(s): Joystick, OEM Joystick or Foot Pedal

Recommended Option(s): - 2 pump flow - New flange SAE Code 62 - Proportional joystick

Applicable Attachments: - Auger (may require Case Drain) - Crusher O/C - Pulverizer O/C - Shear O/C - Other 2-way high-flow attachments

Notes: Pre-formed and powder-coated tubing to the end of the arm, terminating in ball valve. Flange upgrade available for 20 to 25-metric ton machines, standard for 30+ metric ton machines.

Hydraulic System: Single or double acting (1- or 2-way oil)

Line Sizing: 80% of 1 pump at approximately 25 FPS

Line Pressure: 5,000 PSI rated hoses

Upgradeable: Yes

Control(s): Joystick, OEM Joystick or Foot Pedal

Recommended Option(s): - OEM Monitor Flow Control (standard where applicable) - Electronic Function Select - Secondary Pressure Relief (standard on Komatsu)

Applicable Attachments: Most attachments requiring only 1 circuit with up to 3,000 PSI and 80% of 1 pump flow.

Notes: Pre-formed and powder-coated tubing to the end of the arm, terminating in ball valve. Includes a manually operated combination selector valve. Flange upgrade available on 20-25 metric ton machines, standard for 30+ metric ton machines.

Hydraulic System: Double acting (2-way oil)

Line Sizing: 60% of 2 pump at approximately 35 FPS

Line Pressure: 5,000 PSI rated hoses

Upgradeable: Yes

Control(s): Joystick, OEM Joystick or Foot Pedal

Recommended Option(s): - 2 pump flow - New flange SAE Code 62 - Proportional joystick

Applicable Attachments: - Auger (may require Case Drain) - Crusher O/C - Pulverizer O/C - Shear O/C - Other 2-way high-flow attachments

Notes: Pre-formed and powder-coated tubing to the end of the arm, terminating in ball valve. Flange upgrade available for 20 to 25-metric ton machines, standard for 30+ metric ton machines.

Hydraulic System: Double acting (2-way oil)

Line Sizing: 60% of 2 pump at approximately 35 FPS

Line Pressure: 5,000 PSI rated hoses

Upgradeable: Yes

Control(s): Joystick, OEM Joystick or Foot Pedal

Recommended Option(s): - 2 pump flow - New flange SAE Code 62 - Proportional joystick

Applicable Attachments: - Auger (may require Case Drain) - Crusher O/C - Pulverizer O/C - Shear O/C - Other 2-way high-flow attachments

Notes: Pre-formed and powder-coated tubing to the end of the arm, terminating in ball valve. Flange upgrade available for 20 to 25-metric ton machines, standard for 30+ metric ton machines.

Hydraulic System: Single or double acting (1- or 2-way oil)

Line Sizing: 80% of 1 pump at approximately 25 FPS

Line Pressure: 5,000 PSI rated hoses

Upgradeable: Yes

Control(s): Joystick, OEM Joystick or Foot Pedal

Recommended Option(s): - OEM Monitor Flow Control (standard where applicable) - Electronic Function Select - Secondary Pressure Relief (standard on Komatsu)

Applicable Attachments: Most attachments requiring only 1 circuit with up to 3,000 PSI and 80% of 1 pump flow.

Notes: Pre-formed and powder-coated tubing to the end of the arm, terminating in ball valve. Includes a manually operated combination selector valve. Flange upgrade available on 20-25 metric ton machines, standard for 30+ metric ton machines.

Hydraulic System: Single or double acting (1- or 2-way oil)

Line Sizing: 80% of 1 pump at approximately 25 FPS

Line Pressure: 5,000 PSI rated hoses

Upgradeable: Yes

Control(s): Joystick, OEM Joystick or Foot Pedal

Recommended Option(s): - OEM Monitor Flow Control (standard where applicable) - Electronic Function Select - Secondary Pressure Relief (standard on Komatsu)

Applicable Attachments: Most attachments requiring only 1 circuit with up to 3,000 PSI and 80% of 1 pump flow.

Notes: Pre-formed and powder-coated tubing to the end of the arm, terminating in ball valve. Includes a manually operated combination selector valve. Flange upgrade available on 20-25 metric ton machines, standard for 30+ metric ton machines.

Hydraulic System: Double acting (2-way oil)

Line Sizing: 60% of 2 pump at approximately 35 FPS

Line Pressure: 5,000 PSI rated hoses

Upgradeable: Yes

Control(s): Joystick, OEM Joystick or Foot Pedal

Recommended Option(s): - 2 pump flow - New flange SAE Code 62 - Proportional joystick

Applicable Attachments: - Auger (may require Case Drain) - Crusher O/C - Pulverizer O/C - Shear O/C - Other 2-way high-flow attachments

Notes: Pre-formed and powder-coated tubing to the end of the arm, terminating in ball valve. Flange upgrade available for 20 to 25-metric ton machines, standard for 30+ metric ton machines.

Hydraulic System: Double acting (2-way oil)

Line Sizing: 60% of 2 pump at approximately 35 FPS

Line Pressure: 5,000 PSI rated hoses

Upgradeable: Yes

Control(s): Joystick, OEM Joystick or Foot Pedal

Recommended Option(s): - 2 pump flow - New flange SAE Code 62 - Proportional joystick

Applicable Attachments: - Auger (may require Case Drain) - Crusher O/C - Pulverizer O/C - Shear O/C - Other 2-way high-flow attachments

Notes: Pre-formed and powder-coated tubing to the end of the arm, terminating in ball valve. Flange upgrade available for 20 to 25-metric ton machines, standard for 30+ metric ton machines.

Hydraulic System: Double acting (2-way oil)

Line Sizing: 60% of 2 pump at approximately 35 FPS

Line Pressure: 5,000 PSI rated hoses

Upgradeable: Yes

Control(s): Joystick, OEM Joystick or Foot Pedal

Recommended Option(s): - 2 pump flow - New flange SAE Code 62 - Proportional joystick

Applicable Attachments: - Auger (may require Case Drain) - Crusher O/C - Pulverizer O/C - Shear O/C - Other 2-way high-flow attachments

Notes: Pre-formed and powder-coated tubing to the end of the arm, terminating in ball valve. Flange upgrade available for 20 to 25-metric ton machines, standard for 30+ metric ton machines.

Hydraulic System: Double acting (2-way oil)

Line Sizing: 60% of 2 pump at approximately 35 FPS

Line Pressure: 5,000 PSI rated hoses

Upgradeable: Yes

Control(s): Joystick, OEM Joystick or Foot Pedal

Recommended Option(s): - 2 pump flow - New flange SAE Code 62 - Proportional joystick

Applicable Attachments: - Auger (may require Case Drain) - Crusher O/C - Pulverizer O/C - Shear O/C - Other 2-way high-flow attachments

Notes: Pre-formed and powder-coated tubing to the end of the arm, terminating in ball valve. Flange upgrade available for 20 to 25-metric ton machines, standard for 30+ metric ton machines.

Hydraulic System: Double acting (2-way oil)

Line Sizing: 60% of 2 pump at approximately 35 FPS

Line Pressure: 5,000 PSI rated hoses

Upgradeable: Yes

Control(s): Joystick, OEM Joystick or Foot Pedal

Recommended Option(s): - 2 pump flow - New flange SAE Code 62 - Proportional joystick

Applicable Attachments: - Auger (may require Case Drain) - Crusher O/C - Pulverizer O/C - Shear O/C - Other 2-way high-flow attachments

Notes: Pre-formed and powder-coated tubing to the end of the arm, terminating in ball valve. Flange upgrade available for 20 to 25-metric ton machines, standard for 30+ metric ton machines.

Hydraulic System: Double acting (2-way oil)

Line Sizing: 60% of 2 pump at approximately 35 FPS

Line Pressure: 5,000 PSI rated hoses

Upgradeable: Yes

Control(s): Joystick, OEM Joystick or Foot Pedal

Recommended Option(s): - 2 pump flow - New flange SAE Code 62 - Proportional joystick

Applicable Attachments: - Auger (may require Case Drain) - Crusher O/C - Pulverizer O/C - Shear O/C - Other 2-way high-flow attachments

Notes: Pre-formed and powder-coated tubing to the end of the arm, terminating in ball valve. Flange upgrade available for 20 to 25-metric ton machines, standard for 30+ metric ton machines.

Hydraulic System: Single or double acting (1- or 2-way oil)

Line Sizing: 80% of 1 pump at approximately 25 FPS

Line Pressure: 3,000 PSI rated hoses

Upgradeable: Yes

Control(s): Joystick, OEM Joystick or Foot Pedal

Recommended Option(s): - OEM Monitor Flow Control (standard where applicable) - Electronic Function Select - Secondary Pressure Relief (standard on Komatsu) - Thumb Lock (standard feature)

Applicable Attachments: Most attachments requiring only 1 circuit with up to 3,000 PSI and 80% of 1 pump flow.

Notes: Pre-formed and powder-coated tubing to the end of the arm, terminating in ball valve. Includes a manually operated combination selector valve.

Hydraulic System: Double acting (2-way oil)

Line Sizing: 60% of 2 pump at approximately 35 FPS

Line Pressure: 5,000 PSI rated hoses

Upgradeable: Yes

Control(s): Joystick, OEM Joystick or Foot Pedal

Recommended Option(s): - 2 pump flow - New flange SAE Code 62 - Proportional joystick

Applicable Attachments: - Auger (may require Case Drain) - Crusher O/C - Pulverizer O/C - Shear O/C - Other 2-way high-flow attachments

Notes: Pre-formed and powder-coated tubing to the end of the arm, terminating in ball valve. Flange upgrade available for 20 to 25-metric ton machines, standard for 30+ metric ton machines.

Hydraulic System: Double acting (2-way oil)

Line Sizing: 60% of 2 pump at approximately 35 FPS

Line Pressure: 5,000 PSI rated hoses

Upgradeable: Yes

Control(s): Joystick, OEM Joystick or Foot Pedal

Recommended Option(s): - 2 pump flow - New flange SAE Code 62 - Proportional joystick

Applicable Attachments: - Auger (may require Case Drain) - Crusher O/C - Pulverizer O/C - Shear O/C - Other 2-way high-flow attachments

Notes: Pre-formed and powder-coated tubing to the end of the arm, terminating in ball valve. Flange upgrade available for 20 to 25-metric ton machines, standard for 30+ metric ton machines.

Hydraulic System: Single or double acting (1- or 2-way oil)

Line Sizing: 80% of 1 pump at approximately 25 FPS

Line Pressure: 3,000 PSI rated hoses

Upgradeable: Yes

Control(s): Joystick, OEM Joystick or Foot Pedal

Recommended Option(s): - OEM Monitor Flow Control (standard where applicable) - Electronic Function Select - Secondary Pressure Relief (standard on Komatsu) - Thumb Lock (standard feature)

Applicable Attachments: Most attachments requiring only 1 circuit with up to 3,000 PSI and 80% of 1 pump flow.

Notes: Pre-formed and powder-coated tubing to the end of the arm, terminating in ball valve. Includes a manually operated combination selector valve.

Hydraulic System: Single or double acting (1- or 2-way oil)

Line Sizing: 80% of 1 pump at approximately 25 FPS

Line Pressure: 5,000 PSI rated hoses

Upgradeable: Yes

Control(s): Joystick, OEM Joystick or Foot Pedal

Recommended Option(s): - OEM Monitor Flow Control (standard where applicable) - Electronic Function Select - Secondary Pressure Relief (standard on Komatsu)

Applicable Attachments: Most attachments requiring only 1 circuit with up to 3,000 PSI and 80% of 1 pump flow.

Notes: Pre-formed and powder-coated tubing to the end of the arm, terminating in ball valve. Includes a manually operated combination selector valve. Flange upgrade available on 20-25 metric ton machines, standard for 30+ metric ton machines.

Hydraulic System: Double acting (2-way oil)

Line Sizing: 60% of 2 pump at approximately 35 FPS

Line Pressure: 5,000 PSI rated hoses

Upgradeable: Yes

Control(s): Joystick, OEM Joystick or Foot Pedal

Recommended Option(s): - 2 pump flow - New flange SAE Code 62 - Proportional joystick

Applicable Attachments: - Auger (may require Case Drain) - Crusher O/C - Pulverizer O/C - Shear O/C - Other 2-way high-flow attachments

Notes: Pre-formed and powder-coated tubing to the end of the arm, terminating in ball valve. Flange upgrade available for 20 to 25-metric ton machines, standard for 30+ metric ton machines.

Hydraulic System: Double acting (2-way oil)

Line Sizing: 60% of 2 pump at approximately 35 FPS

Line Pressure: 5,000 PSI rated hoses

Upgradeable: Yes

Control(s): Joystick, OEM Joystick or Foot Pedal

Recommended Option(s): - 2 pump flow - New flange SAE Code 62 - Proportional joystick

Applicable Attachments: - Auger (may require Case Drain) - Crusher O/C - Pulverizer O/C - Shear O/C - Other 2-way high-flow attachments

Notes: Pre-formed and powder-coated tubing to the end of the arm, terminating in ball valve. Flange upgrade available for 20 to 25-metric ton machines, standard for 30+ metric ton machines.

Hydraulic System: Double acting (2-way oil)

Line Sizing: 60% of 1 pump at approximately 30 FPS

Line Pressure: 3,000 PSI rated hoses

Upgradeable: Yes

Control(s): Foot Pedal or Standard Joystick activated

Recommended Option(s): Proportional Joystick

Applicable Attachments: - Thumb - Under Mount Grapple

Notes: Plumbing to end of the boom with hoses and manifolds for arm. Manifolds are plugged ready for customer-supplied attachment hose.

Hydraulic System: Double acting (2-way oil)

Line Sizing: 60% of 2 pump at approximately 35 FPS

Line Pressure: 5,000 PSI rated hoses

Upgradeable: Yes

Control(s): Joystick, OEM Joystick or Foot Pedal

Recommended Option(s): - 2 pump flow - New flange SAE Code 62 - Proportional joystick

Applicable Attachments: - Auger (may require Case Drain) - Crusher O/C - Pulverizer O/C - Shear O/C - Other 2-way high-flow attachments

Notes: Pre-formed and powder-coated tubing to the end of the arm, terminating in ball valve. Flange upgrade available for 20 to 25-metric ton machines, standard for 30+ metric ton machines.

Hydraulic System: Double acting (2-way oil)

Line Sizing: 60% of 2 pump at approximately 35 FPS

Line Pressure: 5,000 PSI rated hoses

Upgradeable: Yes

Control(s): Joystick, OEM Joystick or Foot Pedal

Recommended Option(s): - 2 pump flow - New flange SAE Code 62 - Proportional joystick

Applicable Attachments: - Auger (may require Case Drain) - Crusher O/C - Pulverizer O/C - Shear O/C - Other 2-way high-flow attachments

Notes: Pre-formed and powder-coated tubing to the end of the arm, terminating in ball valve. Flange upgrade available for 20 to 25-metric ton machines, standard for 30+ metric ton machines.

Hydraulic System: Double acting (2-way oil)

Line Sizing: Dedicated low flow (20 GPM or less)

Line Pressure: 3,000 PSI rated hoses

Upgradeable: Yes

Control(s): Joystick, OEM Joystick, Proportional Joystick or Foot Pedal

Recommended Option(s): - Proportional Joystick - Secondary Oil Source (used when mounting over an existing auxiliary circuit) - Case Drain

Applicable Attachments: - Rotate - Tilting Bucket - Custom Attachments

Notes: Plumbing to end of the arm ending with low-flow disconnects.

Hydraulic System: Single acting (1-Way Oil)

Line Sizing: 80% of 1 pump at approximately 25 FPS

Line Pressure: 3,000 PSI rated hoses

Upgradeable: Yes

Control(s): Joystick, Foot Pedal or Foot Switch

Recommended Option(s): - 2 Pump Flow - High Pressure Hose (special application) - Oversized Tubing (special application) - In-Monitor Control (standard in most cases) - Quick Disconnects

Applicable Attachments: - Breaker (Hammer) - Breaker (Hammer) - 2 speed (may require additional equipment to shift speeds) - Compactor

Notes: Pre-formed and powder-coated tubing to the end of the arm, terminating in ball valve.

Hydraulic System: Double acting (2-way oil)

Line Sizing: 60% of 2 pump at approximately 35 FPS

Line Pressure: 5,000 PSI rated hoses

Upgradeable: Yes

Control(s): Joystick, OEM Joystick or Foot Pedal

Recommended Option(s): - 2 pump flow - New flange SAE Code 62 - Proportional joystick

Applicable Attachments: - Auger (may require Case Drain) - Crusher O/C - Pulverizer O/C - Shear O/C - Other 2-way high-flow attachments

Notes: Pre-formed and powder-coated tubing to the end of the arm, terminating in ball valve. Flange upgrade available for 20 to 25-metric ton machines, standard for 30+ metric ton machines.

Hydraulic System: Double acting (2-way oil)

Line Sizing: 60% of 2 pump at approximately 35 FPS

Line Pressure: 5,000 PSI rated hoses

Upgradeable: Yes

Control(s): Joystick, OEM Joystick or Foot Pedal

Recommended Option(s): - 2 pump flow - New flange SAE Code 62 - Proportional joystick

Applicable Attachments: - Auger (may require Case Drain) - Crusher O/C - Pulverizer O/C - Shear O/C - Other 2-way high-flow attachments

Notes: Pre-formed and powder-coated tubing to the end of the arm, terminating in ball valve. Flange upgrade available for 20 to 25-metric ton machines, standard for 30+ metric ton machines.

Hydraulic System: Single acting (1-Way Oil)

Line Sizing: 80% of 1 pump at approximately 25 FPS

Line Pressure: 3,000 PSI rated hoses

Upgradeable: Yes

Control(s): Joystick, Foot Pedal or Foot Switch

Recommended Option(s): - 2 Pump Flow - High Pressure Hose (special application) - Oversized Tubing (special application) - In-Monitor Control (standard in most cases) - Quick Disconnects

Applicable Attachments: - Breaker (Hammer) - Breaker (Hammer) - 2 speed (may require additional equipment to shift speeds) - Compactor

Notes: Pre-formed and powder-coated tubing to the end of the arm, terminating in ball valve.

Hydraulic System: Single or double acting (1- or 2-way oil)

Line Sizing: 80% of 1 pump at approximately 25 FPS

Line Pressure: 5,000 PSI rated hoses

Upgradeable: Yes

Control(s): Joystick, OEM Joystick or Foot Pedal

Recommended Option(s): - OEM Monitor Flow Control (standard where applicable) - Electronic Function Select - Secondary Pressure Relief (standard on Komatsu)

Applicable Attachments: Most attachments requiring only 1 circuit with up to 3,000 PSI and 80% of 1 pump flow.

Notes: Pre-formed and powder-coated tubing to the end of the arm, terminating in ball valve. Includes a manually operated combination selector valve. Flange upgrade available on 20-25 metric ton machines, standard for 30+ metric ton machines.

Hydraulic System: Double acting (2-way oil)

Line Sizing: 60% of 2 pump at approximately 35 FPS

Line Pressure: 5,000 PSI rated hoses

Upgradeable: Yes

Control(s): Joystick, OEM Joystick or Foot Pedal

Recommended Option(s): - 2 pump flow - New flange SAE Code 62 - Proportional joystick

Applicable Attachments: - Auger (may require Case Drain) - Crusher O/C - Pulverizer O/C - Shear O/C - Other 2-way high-flow attachments

Notes: Pre-formed and powder-coated tubing to the end of the arm, terminating in ball valve. Flange upgrade available for 20 to 25-metric ton machines, standard for 30+ metric ton machines.

Hydraulic System: Double acting (2-way oil)

Line Sizing: 60% of 2 pump at approximately 35 FPS

Line Pressure: 5,000 PSI rated hoses

Upgradeable: Yes

Control(s): Joystick, OEM Joystick or Foot Pedal

Recommended Option(s): - 2 pump flow - New flange SAE Code 62 - Proportional joystick

Applicable Attachments: - Auger (may require Case Drain) - Crusher O/C - Pulverizer O/C - Shear O/C - Other 2-way high-flow attachments

Notes: Pre-formed and powder-coated tubing to the end of the arm, terminating in ball valve. Flange upgrade available for 20 to 25-metric ton machines, standard for 30+ metric ton machines.

Hydraulic System: Double acting (2-way oil)

Line Sizing: 60% of 1 pump at approximately 30 FPS

Line Pressure: 3,000 PSI rated hoses

Upgradeable: Yes

Control(s): Foot Pedal or Standard Joystick activated

Recommended Option(s): Proportional Joystick

Applicable Attachments: - Thumb - Under Mount Grapple

Notes: Plumbing to end of the boom with hoses and manifolds for arm. Manifolds are plugged ready for customer-supplied attachment hose.